Darn, those little crimp covers were small! And how were you supposed to make them look like a small bead vs. a glob of smashed sterling silver? Have you ever tried cutting off a smashed crimp bead without ruining the crimp and the jewelry wire? Ask me how I know that this is nearly impossible...ask me how I loathe starting over!
But being the persistant gal that I am, I didn't give up easily. I found a way that works for me, and that is what I am about to show you. To practice this little tutorial, you will need:
1. a finished, beaded bracelet on jewelry wire that has been crimped to the clasp
2. a crimp bead that "fits" the size of crimp you used
(I use 2 x 2 mm sterling silver crimps and 3.2 mm sterling silver crimp covers from Aunties Beads.)
3. a pair of crimping pliers
First, place the crimp cover behind the crimp and hold in place with your non-dominant hand. Use your other hand to grasp the crimp bead with your pliers. I am right-handed, but this should work just as easily for lefties.
Second, use the first notch of the crimping pliers to squeeze the crimp bead *mostly* closed. Don't over-squeeze, this only takes a tiny bit of pressure with your pliers! You will still see a slight slit in the crimp bead, but it should be almost closed when you finish this step.
Finally, grasp the crimp bead in the opposite direction with the first groove of the crimping pliers. It will seem like this is going to ruin the crimp bead, but you need just a *tiny bit* of downward pressure to close up the slight slit.
Lastly, repeat the second step if the crimp bead still needs a little more closure. It is O.K. to go back and forth between the last two steps until you are happy...just don't over-squeeze!
And with a little practice, you should have perfect crimp beads time after time! Please let me know if you found this tutorial helpful...and how did your crimp beads turn out?
Posts
